Polyurethane signal shielding cable,TPU oil-resistant data transmission cable

TPU signal shielded cable, polyurethane oil resistant data transmission cable LI6YC11Y In modern industrial and electronic equipment, signal cables play a vital role. Especially TPU signal shielding cable polyurethane oil resistant data transmission cable LI6YC11Y. This cable uses high-quality polyurethane material, not only in the transmission of signals in the process of excellent performance, but also has strong oil resistance and wear resistance, so widely used in different industries. This article will be aimed at the product's application scope, installation methods, precautions, materials and manufacturing technology and other aspects of in-depth discussion.

I. Scope of application

TPU signal shielded cable LI6YC11Y is widely used in many fields. In automation equipment and mechanical equipment, this kind of cable is often used as a signal transmission line to connect key components such as sensors and actuators, and with its good shielding performance, it effectively prevents external interference from affecting signal transmission.

The cable has also been further applied in industrial control systems. In the communication between electric power and electrical equipment, due to its excellent oil resistance and wear resistance, it can maintain stable transmission in harsh environments. In addition, TPU cables are increasingly popular in the fields of robots and drones, and are suitable for high-frequency signal transmission.

In the fields of automotive electronics, medical equipment, and communication equipment, the LI6YC11Y also shows good performance. In these special application scenarios, the flexibility of the cable, its ability to withstand environmental factors, and its excellent electrical performance will affect the performance of the entire equipment and improve the reliability and safety of the product.

II. Installation method

The installation method of TPU signal shielded cables is relatively simple, but certain steps still need to be followed to ensure the performance of the cable.

1. Preparation tools: cable shears, wire stripping pliers, insulating tape and other tools need to be prepared to ensure that the cable port is clean and tidy.

2. Stripping: Before installing the cable, it is necessary to properly strip the cable, strip the outer skin, expose the inner conductor, and be careful not to damage the inner conductor.

3. Connection: Connect the cable to the terminal of the equipment according to the use requirements of the cable to ensure that the connection is firm. If waterproof joints are used, ensure that they are well sealed to prevent moisture ingress.

4. Fixation: During installation, ensure that the cable is not pulled or compressed, and use cable retaining clips to stabilize it.

5. Test: After installation, necessary electrical tests shall be carried out to ensure that the signal can be transmitted normally without abnormality.

III. Precautions

When using TPU signal shielding cable LI6YC11Y, pay attention to the following points to ensure its performance:

• Avoid bending: The cable should avoid severe bending during transportation and installation, so as not to affect the transmission quality of the signal.

• Pay attention to the environment: Although the cable is oil resistant, it still needs to be properly evaluated in extreme environments such as high temperatures and strong corrosion.

• Regular inspection: During long-term use, it is recommended to regularly check the cable condition to discover potential damage hazards.

• Scope of application: Ensure that the cable is used within the appropriate range and avoid being applied to equipment and environments beyond its technical specifications.

IV. Product Material

TPU signal shielding cable material is the key to its performance advantages. The cable is made of high-quality polyurethane (TPU) material with excellent abrasion resistance and oil resistance, which enables the cable to work stably in environments with severe oil and mechanical wear.

In addition, the conductor inside the cable is made of oxygen-free copper, which ensures low resistance and good conductivity of the cable. The shielding layer is also made of high-quality metal materials to prevent external electromagnetic interference, thus improving the stability of signal transmission.

V. Production process

Shanghai Oksen Wire & Cable Co., Ltd. pursues high standardization and automation in the production process of TPU signal shielded cable LI 6YC 11Y to ensure the uniformity and reliability of product quality.

Our manufacturing process includes strict screening of raw materials, precision machining of conductors, uniform coating of insulation layers, and fine coating of shielding layers. We use modern testing equipment to fully test each cable to ensure its performance meets CE standards.

In the production process, we also strive for environmental protection, raw materials are sourced from certified environmental protection suppliers, to ensure that the entire manufacturing process has a small impact on the environment.

sum up

TPU signal shielded cable LI6YC11Y plays a unique role in signal transmission due to its superior mechanical and electrical properties. With the increasing demand for intelligent and automated development in all walks of life, the market application prospects of this cable will be broader.

Shanghai Oksen Wire & Cable Co., Ltd. is committed to providing customers with high-quality, high-performance cable products, and to provide customers with comprehensive technical support and consulting services. We look forward to working with you to jointly promote innovation and development in more fields. For more product information or cooperation matters, please contact us.